This company produces the high speed mixer is advanced in designing, convenient operation, safe and reliable, high efficiency, small energy consumption, low noise, is your ideal products of choose and buy,

一、high speed mixer product use

High-speed machine mainly used in PVC resin mix, colored, coloring, drying, polyethylene, polypropylene particles such as ABS polycarbonate hygroscopicity resin before shaping process of drying, the mixture of phenolic resin. It is one of the necessary equipment of plastic factory, in rubber, pharmaceutical, dye and other industries have a wide range of USES.

Because it has a fast, mixture mixing, absorbent resin to increase agent is good, the machine is easy to operate, easy to clean, durable, compact structure, etc. In recent years, it has gradually replaced the low speed mixing machine, widely used in the production of all kinds of plastic industry.

二、high speed mixer product introduction

A. high speed mixer pot body adopts the delta 6 mm SUS304 stainless steel plate production, the inner surface is smooth and hard, has wear-resisting, corrosion resistance, high temperature resistant and not easily stained with material, etc.

B. high-speed mixer, the cover material for ZL102 aluminum in finish turning and polishing on the surface, not easy to touch, easy to open the lid.

C. high speed mixer pot made of delta 8 mm SUS304 stainless steel impeller material by ZG1Cr18Ni9Ti stainless steel, surface after polishing, the surface is smooth and hard wear-resisting, corrosion resistance.

D. the high-speed mixer hot mix by pneumatic open the lid. Main shaft adopts 3 sets of NSK deep groove ball bearings

E. high-speed mixer shaft seal adopts a variety of sizes of framing lips oil seal, dump tray, such as gas seal sealing way, can prevent the material into the shaft seal parts, sealing is reliable, stable.

F. high-speed mixer adopts belt deceleration method, reliable work, also can prevent overload.

G. high-speed mixer thermal mixing pot using two silicon rubber sealing strip, sealing is reliable, high temperature resistance, no deformation.

一、500 l hot mix part technical parameters:

1, the total volume: hot mix 500 litres

2, the effective volume: 340 l

3, number of hot mix syrup: 3 pieces

4, stirrer speed: 430/860 RPM

5, heating power: 9 kw, electric heating

6, mixed time: 6-15 minutes/pan

7, motor power - 55/75 - kw, with double speed motor

8, discharging mode: pneumatic

9, mixing barrel material: barrel wall and bottom 5 mm stainless steel plate, polishing, internal barrel outer 5 mm steel plate

10 and barrel belly thermometer and heat rods

11, mixing blades: 3 mixing blades for stainless steel, dynamic balancing correction, and polishing

12, steel frame. Attached to the machinery installation rings

13, steel racks, machinery installation attached rings

14, 1 with stainless steel hopper

15, guardrail and escalator

二、the 1000 l cooling mixing some technical parameters:

1, the total volume: cold mixing effective volume: 1000 l, 650 l

2, mixing slurry count: 1 piece

3, stirrer speed: 60 RPM

4, cold mix is equipped with a built-in water jacket, water cooling, increase the cooling area;

5, cooling time: 10-15 minutes/pan

6, motor power: 11 kw,

7, deceleration machine: the hangzhou reducer

8, 1 only electric cabinet

9, the main electrical appliances: delixi